| Model | TL-B12W-S |
|---|---|
| Size | 120 mm |
| Thickness | 25.6 mm |
| Speed range | –2150 RPM |
| Max airflow | 69 CFM |
| Max pressure | 2.87 mmH₂O |
| Max noise | 28.1 dBA |
| Bearing | S-FDB V2 Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | White |
TL-B12W-S is a white ARGB version of the pressure model rated up to 2150 rpm with 69 CFM and 2.87 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-B12W-S 120mm ARGB Fan
The TL-B12W-S balances airflow and pressure in a way that suits both case ventilation and restricted cooling setups. Its 69 CFM airflow moves a solid volume of air through open case space, while the 2.87 mmH2O static pressure rating means it can push through dense heatsink fins or mesh filters without stalling. Buyers choosing between airflow and pressure fans should note that this single model covers both roles reasonably well.
At 2150 RPM the fan is rated at 28.1 dB(A), so expect audible but moderate noise at full speed; PWM control via the 4-pin connector lets you lower that in everyday use. The 25.6 mm thickness is slightly above the common 25 mm, so check clearance in tight mounts. ARGB lighting runs from a separate 3-pin 5V header, and the S-FDB V2 bearing is the stated bearing type. The data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-B12W-S quiet at full speed?
Thermalright rates the TL-B12W-S at 28.1 dB(A) at its maximum 2150 RPM. That is a moderate noise level rather than a silent rating, and the 4-pin PWM connector lets you run it slower for quieter operation.
Is this fan better for case airflow or for a radiator and heatsink?
It is rated for both roles. The 69 CFM airflow suits open case ventilation, while the 2.87 mmH2O static pressure helps it push air through dense fins, radiators or mesh filters where low-pressure fans struggle.
What connectors does the TL-B12W-S need and will it fit my case?
It uses a 4-pin PWM connector for the fan and a separate 3-pin 5V ARGB connector for lighting, so your board needs both headers. It is a 120 mm fan that is 25.6 mm thick, slightly over the usual 25 mm, so check clearance.















