| Model | TL-K12R |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –2150 RPM |
| Max airflow | 69 CFM |
| Max pressure | 2.87 mmH₂O |
| Max noise | 27 dBA |
| Bearing | S-FDB V2 Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-K12R is a reverse blade performance model rated up to 2150 rpm with 69 CFM and 2.87 mmH2O static pressure at 27 dBA
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-K12R 120mm ARGB Fan
The TL-K12R is a 120mm, 25mm-thick fan rated for 69 CFM airflow and 2.87 mmH2O static pressure at a maximum 2150 RPM. That combination of strong airflow and solid static pressure makes it a reasonable candidate for both open case ventilation and airflow-restricted spots such as heatsinks or radiators, where pressure matters more than raw CFM. Noise is listed at 27 dB(A), so expect it to be audible at full speed rather than silent.
Mounting is standard 120mm with 25mm thickness, so it fits common case and cooler positions. It uses a 4-pin PWM connector for speed control plus a separate 3-pin 5V ARGB header for lighting, so your motherboard needs both. The S-FDB V2 bearing is specified, while the data does not list a price or release year. Colour is black with ARGB lighting.
Frequently asked questions
Is the Thermalright TL-K12R 120mm ARGB quiet?
The manufacturer lists noise at 27 dB(A) at a maximum 2150 RPM. That is an audible level at full speed, so expect noticeable sound under load rather than silent operation. PWM control lets you run it slower.
What is the TL-K12R best used for?
With 69 CFM airflow and 2.87 mmH2O static pressure, it suits both case ventilation and restricted airflow positions like heatsinks or radiators. The static pressure figure makes it a reasonable choice where resistance is a factor.
Does the TL-K12R fit a standard 120mm mount and how is it connected?
It is a 120mm fan with 25mm thickness, matching common 120mm case and cooler mounts. It connects via a 4-pin PWM header plus a 3-pin 5V ARGB header, so your board needs both for speed control and lighting.















