| Model | TL-K12-X28-R9 |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | –2400 RPM |
| Max airflow | 96.3 CFM |
| Max pressure | 3.15 mmH₂O |
| Max noise | 39.9 dBA |
| Bearing | S-FDB V2 Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-K12-X28-R9 is a thick frame nine blade high speed model rated up to 2400 rpm with 96.3 CFM
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-K12-X28-R9 120mm ARGB Fan
The TL-K12-X28-R9 is a 120mm fan with a 28mm frame, so it is thicker than a standard 25mm fan and needs a little more clearance at the mounting point. Its 2400 RPM ceiling and 3.15 mmH2O static pressure suit radiators, heatsinks and other restricted airflow paths, while the 96.3 CFM figure shows strong overall airflow as well. Buyers should expect up to 39.9 dB(A) at full speed, so the fan is best treated as a performance-first part rather than a near-silent one.
Cooling and lighting connect separately: a 4-pin PWM header controls speed, and a 3-pin 5V ARGB header drives the lighting. The S-FDB V2 bearing is the listed bearing type, and the fan is black with ARGB illumination. The manufacturer data does not list a price or release year, so check the retailer for current pricing. Confirm your case or cooler accepts a 28mm-thick 120mm fan before ordering.
Frequently asked questions
Is the Thermalright TL-K12-X28-R9 quiet?
The listed noise figure is 39.9 dB(A) at its 2400 RPM maximum. The data does not give noise at lower speeds, so PWM speed control will matter if you want quieter operation.
What is the TL-K12-X28-R9 best used for?
With 3.15 mmH2O static pressure and 96.3 CFM airflow at 2400 RPM, it suits radiators, heatsinks and other airflow-restricted spots. The 28mm thickness means you should check clearance first.
Does the TL-K12-X28-R9 have RGB, and how does it connect?
Yes, it has ARGB lighting. It uses a 4-pin PWM connector for fan speed plus a separate 3-pin 5V ARGB connector for lighting, so your motherboard or controller needs both headers.















