| Model | CL-F245-PL12SW-A |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 58.13 CFM |
| Max pressure | 2.86 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 2510-4 Pin + 5V ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
CL-F245-PL12SW-A is a 28 mm thick 120 mm ARGB fan reaching 2000 RPM with 58.13 CFM and 2.86 mmH2O static pressure
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake SWAFAN 120 EX INFINITY ARGB Sync 3-Fan Pack
The SWAFAN 120 EX INFINITY ARGB Sync 3-Fan Pack runs from 500 to 2000 RPM and delivers 58.13 CFM with 2.86 mmH2O of static pressure. That balance suits buyers moving air through a case while still pushing through a radiator or mesh filter, since the pressure figure is high enough for restrictive obstacles rather than open-frame airflow alone. The 28 mm thickness is slightly deeper than a standard 120 mm fan, so check clearance at the mounting point before buying.
Noise is rated at 30 dB(A), which is the manufacturer figure for this fan and not a measured review result. The hydraulic bearing is listed as the bearing type, and the connector is a 2510-4 pin plus a 5V ARGB 3-pin, so the fans need a 5V ARGB header for lighting. The data does not list a price or release year. The pack is black with ARGB lighting, and the data does not list per-fan or pack airflow beyond the single-fan figures above.
Frequently asked questions
Is the Thermaltake SWAFAN 120 EX INFINITY ARGB Sync 3-Fan Pack quiet?
The manufacturer rates it at 30 dB(A), with a 500 RPM minimum and 2000 RPM maximum. That is the listed noise figure only; the data does not include measured noise results at specific speeds.
What is this fan best for, airflow or static pressure?
It lists 58.13 CFM airflow and 2.86 mmH2O static pressure, so the data supports use where air must pass a radiator or filter. The 28 mm thickness means you should confirm clearance at the mount.
Does the SWAFAN 120 EX INFINITY ARGB Sync 3-Fan Pack need a special RGB header?
Yes. The connector is listed as 2510-4 pin plus 5V ARGB 3-pin, so the ARGB lighting requires a 5V ARGB header. The data does not list a price or release year.















