| Model | CL-F248-PL12SW-A |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 58.13 CFM |
| Max pressure | 2.86 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 2510-4 Pin + 5V ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
CL-F248-PL12SW-A is a 28 mm thick 120 mm ARGB fan reaching 2000 RPM with 58.13 CFM and 2.86 mmH2O static pressure
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake SWAFAN 240 UNIFY ARGB Sync
The Thermaltake SWAFAN 240 UNIFY ARGB Sync (CL-F248-PL12SW-A) is a 120 mm fan that is 28 mm thick rather than the usual 25 mm, so check clearance at your mounting points before fitting it. Its 2.86 mmH2O static pressure is the number to note: this fan is built for pushing air through radiators, heatsinks and dense mesh filters, while its 58.13 CFM airflow keeps it usable as a general case fan. The 500–2000 RPM range lets you tune between quiet idle running and full-speed cooling.
At its 2000 RPM maximum Thermaltake rates the fan at 30 dB(A), so expect audible noise at full speed and a quieter result when you lower the RPM. The hydraulic bearing is specified for longer, smoother operation. Connection uses a 2510-4 pin for power plus a 5V ARGB 3-Pin for lighting, so your motherboard or controller needs a 5V ARGB header. The data does not list a price or release year.
Frequently asked questions
Is the Thermaltake SWAFAN 240 UNIFY ARGB Sync quiet?
Thermaltake rates it at 30 dB(A) at its 2000 RPM maximum, so it is audible at full speed. The 500 RPM minimum lets you run it slower for quieter operation, though the data does not list noise at lower speeds.
Is this fan better for a radiator or as a case fan?
Its 2.86 mmH2O static pressure suits radiators, heatsinks and restrictive filters, where pressure matters more than raw airflow. The 58.13 CFM airflow still makes it workable as a general case fan in a 120 mm position.
What connectors does the SWAFAN 240 UNIFY ARGB Sync need?
It uses a 2510-4 pin connector for fan power and a 5V ARGB 3-Pin connector for the ARGB lighting. Your motherboard or controller therefore needs a 5V ARGB header, and the 28 mm thickness should be checked against your mounting space.















