| Model | CL-F249-PL12SW-A |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 58.13 CFM |
| Max pressure | 2.67 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 2510-4 Pin + 5V ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
CL-F249-PL12SW-A is a 28 mm thick 120 mm ARGB fan reaching 2000 RPM with 58.13 CFM and 2.67 mmH2O static pressure
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake SWAFAN 360 UNIFY ARGB Sync
The SWAFAN 360 UNIFY ARGB Sync uses 120 mm fans that are 28 mm thick rather than the usual 25 mm, so check clearance at the mounting point before you commit. Its 2.67 mmH2O static pressure is the number that matters for radiators and dense mesh, while 58.13 CFM shows it still moves a reasonable volume of air as a case fan. The 500–2000 RPM range lets you run it slow for everyday use or push it when load rises.
Thermaltake rates noise at 30 dB(A), which is the figure to expect near the top of that range rather than at 500 RPM. The hydraulic bearing is listed for longer, quieter service life than a sleeve design. Connection is a 2510-4 pin plus a 5V ARGB 3-pin header, so your board needs an ARGB header for lighting control. The data does not list a price or release year.
Frequently asked questions
Is the Thermaltake SWAFAN 360 UNIFY ARGB Sync quiet?
Thermaltake rates it at 30 dB(A), and the 500 RPM minimum lets you run it well below the 2000 RPM maximum. The single 30 dB(A) figure is the only noise number the manufacturer lists, so expect that level toward the higher end of the range.
Is this fan better for a radiator or as a case fan?
Its 2.67 mmH2O static pressure suits radiators and restrictive mesh, while 58.13 CFM gives usable airflow for case mounting. The 28 mm thickness is greater than standard 25 mm fans, so confirm clearance before installing it in tight spots.
What connector and lighting does the SWAFAN 360 UNIFY ARGB Sync use?
It uses a 2510-4 pin fan connector plus a 5V ARGB 3-pin header, and the lighting is ARGB in a black finish. Your motherboard or controller needs a 5V 3-pin ARGB header to drive the lighting. The data does not list a price.















