| Model | Phantom M-3 12 PWM ARGB Reverse |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 50.2 CFM |
| Max pressure | 1.44 mmH₂O |
| Max noise | 30.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
Phantom M-3 12 PWM ARGB Reverse is a 120 mm 25 mm white fan rated 500-1800 RPM 50.2 CFM and 1.44 mmH2O 30.8 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Phantom M-3 Reverse White Fan
The Phantom M-3 Reverse White is a 120 mm, 25 mm thick fan aimed at buyers who want ARGB lighting in a white build. Its 50.2 CFM airflow and 1.44 mmH2O static pressure sit in a balanced range, so it suits case ventilation and low-to-moderate restriction mounts better than thick radiators, where higher pressure fans are usually preferred. The 500 to 1800 RPM range lets you tune speed through PWM.
Noise is rated at 30.8 dB(A), which is the figure to expect near the top of the range rather than at idle speeds. The hydraulic bearing is listed for quieter, longer running than basic sleeve designs. Mounting is standard 120 mm with 25 mm thickness, and the fan uses a 4-pin PWM connector plus a separate 3-pin ARGB header, so your board needs an ARGB header or controller. The data does not list a price or release year.
Frequently asked questions
Is the AeroCool Phantom M-3 Reverse White quiet?
The manufacturer rates it at 30.8 dB(A), which is the listed noise figure at its rated operation. Because it runs from 500 to 1800 RPM via 4-pin PWM, you can lower the speed to reduce noise, though the data does not give noise at specific RPM points.
What is the Phantom M-3 Reverse White best for?
With 50.2 CFM airflow and 1.44 mmH2O static pressure, it fits case ventilation and airflow-focused builds. Its pressure is modest, so thick radiators or heavily restricted mounts may call for a higher-pressure fan. The reverse blade design is intended for reversed airflow orientation.
Does the AeroCool Phantom M-3 Reverse White fit my case and motherboard?
It is a standard 120 mm fan, 25 mm thick, so it fits 120 mm mounting positions with 25 mm clearance. It connects with a 4-pin PWM cable for speed control and a separate 3-pin ARGB cable, so you need an ARGB header or controller for lighting.















