| Model | Phantom M-3 12 PWM ARGB Reverse |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 50.2 CFM |
| Max pressure | 1.44 mmH₂O |
| Max noise | 30.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Phantom M-3 12 PWM ARGB Reverse is a 120 mm 25 mm black fan rated 500-1800 RPM 50.2 CFM and 1.44 mmH2O 30.8 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Phantom M-3 Reverse Fan
The AeroCool Phantom M-3 Reverse is a 120mm, 25mm-thick ARGB fan running from 500 to 1800 RPM via 4-pin PWM. Its 50.2 CFM airflow against 1.44 mmH2O static pressure suggests a balanced case-fan profile: it moves decent air volume freely, but the modest pressure figure means thick radiators or dense dust filters will ask more of it than open case mounting. Buyers should treat it primarily as a case airflow fan rather than a high-restriction radiator specialist.
Noise is rated at 30.8 dB(A), so expect audible airflow near the 1800 RPM ceiling and quieter running toward the 500 RPM floor, though the data does not list a minimum noise figure. The hydraulic bearing is specified for the fan, and the 4-pin PWM plus 3-pin ARGB connectors require a PWM header and an ARGB header on the motherboard or controller. The data does not list a price or release year.
Frequently asked questions
Is the AeroCool Phantom M-3 Reverse quiet at full speed?
AeroCool rates it at 30.8 dB(A), which is the only noise figure listed. The data does not give a separate minimum noise value, so expect the 500 RPM floor to run quieter than the 1800 RPM maximum.
What is the AeroCool Phantom M-3 Reverse best used for?
With 50.2 CFM and 1.44 mmH2O static pressure, it suits case airflow where restriction is low. The modest pressure rating makes it less ideal for thick radiators or dense filters, based on the listed figures alone.
Does the AeroCool Phantom M-3 Reverse fit my case and motherboard?
It is a 120mm fan with 25mm thickness, so it needs standard 120mm mounting space. It uses a 4-pin PWM connector plus a 3-pin ARGB connector, so your board or controller needs both headers.















