| Model | Dark Force 12cm |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1200–1200 RPM |
| Max airflow | 41.4 CFM |
| Max pressure | 1.32 mmH₂O |
| Max noise | 22.5 dBA |
| Bearing | Sleeve Bearing |
| Connector | 3-pin |
| Lighting | None |
| Colour | Black |
Dark Force 12cm is a 120 mm 25 mm black fan rated 1200 RPM 41.4 CFM and 1.32 mmH2O 22.5 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Dark Force 12cm Fan
The AeroCool Dark Force 12cm is a fixed-speed 120mm fan, so there is no PWM control and no RPM range to tune: it runs at 1200 RPM from a 3-pin connector. Its 41.4 CFM airflow and 1.32 mmH2O static pressure sit in a balanced, general-purpose range rather than a pressure-optimised one, so it suits open case ventilation and low-restriction mesh or grille positions better than dense radiators or thick dust filters. Buyers should treat the 22.5 dB(A) figure as the manufacturer's rating at that single speed, not a variable curve.
Mounting is standard: 120mm diameter and 25mm thickness fit common 120mm case and cooler mounts, and the 3-pin connector plugs into a chassis fan header, though speed control depends on the motherboard's voltage mode. The sleeve bearing is a simple, low-cost bearing type, and the black frame has no lighting. The data does not list a price, release year, warranty, or included accessories, so check the retailer listing for those details before ordering.
Frequently asked questions
Is the AeroCool Dark Force 12cm quiet enough for a bedroom PC?
AeroCool rates it at 22.5 dB(A) at its fixed 1200 RPM. That is the only noise figure in the data, and because the fan has no PWM control, it cannot be slowed below that speed through a standard 3-pin header.
Is the Dark Force 12cm better for case airflow or for a radiator?
Its 41.4 CFM airflow and 1.32 mmH2O static pressure are balanced rather than pressure-focused, so it fits general case ventilation and low-restriction mounts better than dense radiators or thick filters. The data lists no radiator-specific rating.
What size mount and connector does the AeroCool Dark Force 12cm need?
It is a 120mm fan with 25mm thickness, matching standard 120mm case and cooler mounts. It uses a 3-pin connector and has no RGB lighting, so it connects to a chassis fan header rather than a PWM header.















