| Model | FT14 WH |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 500–1650 RPM |
| Max airflow | 78.83 CFM |
| Max pressure | 3.6 mmH₂O |
| Max noise | 25.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
White version of the FT14 with the same 1650 RPM quiet high pressure performance
More DeepCool fans · All 140mm models · Browse the full fan database
About the DeepCool FT14 WH
The DeepCool FT14 WH pairs high airflow with strong static pressure, so it suits both open case ventilation and resistance-heavy placements such as heatsinks or radiators. Its 78.83 CFM rating moves a lot of air, while the 3.6 mmH2O figure means it can push through dense fins where a low-pressure fan would stall. The 500–1650 RPM PWM range lets the motherboard dial speed down at idle and ramp up under load.
Noise is rated at 25.1 dB(A), which tells you the fan is specified for relatively quiet operation at its rated point, though the data does not list a sound level for every RPM step. The 140mm diameter and 25mm thickness fit standard 140mm mounts, and the 4-pin PWM connector requires a PWM-capable header. The fluid dynamic bearing is the stated bearing type. Lighting is listed as none and the colour is white. The data does not list a price or release year.
Frequently asked questions
Is the DeepCool FT14 WH quiet enough for a low-noise build?
DeepCool rates it at 25.1 dB(A), and the 500 RPM minimum lets PWM lower the speed at idle. The data does not list noise at each RPM step, so treat 25.1 dB(A) as the stated rating only.
Is the FT14 WH better for case airflow or for a radiator?
It is specified for both: 78.83 CFM supports open case airflow, and 3.6 mmH2O static pressure suits resistance like radiator fins. The data does not include separate test results for either use case.
Does the DeepCool FT14 WH have RGB lighting and what connector does it use?
Lighting is listed as none, so there is no RGB on this white model. It uses a 4-pin PWM connector, which needs a PWM-capable fan header, and it measures 140mm across with 25mm thickness.















