| Model | Tranquil 140 ARGB |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 450–1500 RPM |
| Max airflow | 89.72 CFM |
| Max pressure | 1.82 mmH₂O |
| Max noise | 27.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
ARGB sibling of the quiet Tranquil 140 with the same 1500 RPM ceiling and FDB bearing
More Antec fans · All 140mm models · Browse the full fan database
About the Antec Tranquil 140 ARGB
The Antec Tranquil 140 ARGB is a 140mm, 25mm-thick fan running from 450 to 1500 RPM through a 4-pin PWM connector. Its 89.72 CFM airflow rating is high for the size, which suits open case ventilation, front intakes and exhaust positions where moving large volumes of air matters more than pushing through dense restrictions. The 1.82 mmH2O static pressure figure is modest, so buyers mounting it against thick radiators or tightly packed filters should expect it to be less effective there than a pressure-optimised design.
Noise is rated at 27.5 dB(A) at maximum speed, with the 450 RPM floor giving a slower, quieter option for idle or low-load running. The fluid dynamic bearing is listed as the bearing type, and the ARGB lighting is present in a black frame. The data does not list a price or release year, so those details are not confirmed here. Mounting is standard 140mm with a 4-pin PWM header required for speed control.
Frequently asked questions
Is the Antec Tranquil 140 ARGB quiet?
Antec rates it at 27.5 dB(A) at its 1500 RPM maximum, and the 450 RPM minimum lets you run it slower. The data does not include noise figures for intermediate speeds, so real-world loudness at lower RPM is not confirmed.
What is the Antec Tranquil 140 ARGB best used for?
With 89.72 CFM airflow and 1.82 mmH2O static pressure, it suits case intake and exhaust positions where volume matters. Its modest pressure rating makes it less ideal for thick radiators or dense filters compared with pressure-focused fans.
Does the Antec Tranquil 140 ARGB fit a 140mm mount and need a special header?
It is a 140mm fan with 25mm thickness, so it fits standard 140mm case and cooler mounts. It uses a 4-pin PWM connector, so a PWM-capable motherboard header is needed for speed control. Price is not listed in the data.














