| Model | Tranquil 140 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 450–1500 RPM |
| Max airflow | 89.72 CFM |
| Max pressure | 1.82 mmH₂O |
| Max noise | 27.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Quiet focused 140 mm fan running from 450 to 1500 RPM with FDB bearing and low noise
More Antec fans · All 140mm models · Browse the full fan database
About the Antec Tranquil 140
The Antec Tranquil 140 is a 140mm, 25mm-thick case fan that runs from 450 to 1500 RPM through a 4-pin PWM connector, so your motherboard can slow it down at idle and ramp it up under load. Its 89.72 CFM airflow figure suits open case ventilation and rear or top exhaust duty, while the 1.82 mmH2O static pressure is modest, so buyers mounting it against dense radiators or thick dust filters should expect less push-through than a high-pressure design would give. The rated 27.5 dB(A) at maximum speed is the loudest figure the data lists, and the 450 RPM floor suggests quieter running at low duty.
The fluid dynamic bearing is the only bearing type stated, and Antec lists no lighting and a black colour, so it is a plain, non-RGB fan. Mounting follows the standard 140mm 25mm format, and the 4-pin PWM connector needs a PWM-capable header for speed control. The data does not list a price or release year, so those cannot be confirmed here.
Frequently asked questions
Is the Antec Tranquil 140 quiet?
Antec rates it at 27.5 dB(A) at its 1500 RPM maximum, which is the only noise figure the data lists. Because it starts at 450 RPM via 4-pin PWM, lower speeds should run quieter, but no lower-speed dB values are published.
What is the Antec Tranquil 140 best for?
With 89.72 CFM airflow and 1.82 mmH2O static pressure, it suits case intake and exhaust airflow rather than high-resistance radiators or thick filters. The 140mm size and 25mm thickness fit standard 140mm mounting positions.
Does the Antec Tranquil 140 have RGB lighting?
No. Antec lists no lighting for this fan, and the colour is black. It is a plain 4-pin PWM fan with a fluid dynamic bearing, so it will not add addressable or standard RGB effects to a build.














