| Size | 120 mm |
|---|---|
| Thickness | 30 mm |
| Speed range | 250–2000 RPM |
| Max airflow | 64.3 CFM |
| Max pressure | 3.01 mmH₂O |
| Max noise | 30.2 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin JST D-RGB |
| Lighting | ARGB |
| Colour | White |
Phanteks D30-120 is a 120 mm 30 mm fan rated 250-2000 RPM with 64.3 CFM and 3.01 mmH2O at 30.2 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks D30-120 120mm D-RGB Fan White
The D30-120 is a 30mm thick 120mm fan, so it moves more air than a standard 25mm frame at the same footprint. Its 64.3 CFM airflow and 3.01 mmH2O static pressure suit both case ventilation and restricted heatsinks or radiators, where pressure matters more than raw flow. The 250–2000 RPM range lets you idle quietly and ramp up under load.
Phanteks rates noise at 30.2 dB(A), which is the figure to expect near the top of the range rather than at 250 RPM. The Fluid Dynamic Bearing is listed for long-life operation. A 4-Pin PWM daisy-chain connector lets fans share one header, and the 3-Pin JST D-RGB connector handles the ARGB lighting. Check clearance for the extra 5mm thickness before mounting. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks D30-120 quiet at low RPM?
The fan runs from 250 RPM up to 2000 RPM, and Phanteks rates noise at 30.2 dB(A). That figure applies to the fan's rated operating point, so expect lower noise near the 250 RPM minimum, though the data does not list a per-RPM noise curve.
Is the D30-120 better for radiators or case airflow?
It works for both. The 3.01 mmH2O static pressure is the stronger indicator for radiators and dense heatsinks, while 64.3 CFM supports case ventilation. Its 30mm thickness gives more room for airflow than a standard 25mm frame.
What connectors does the D30-120 use, and does it fit standard mounts?
It uses a 4-Pin PWM daisy-chain connector plus a 3-Pin JST D-RGB connector for the ARGB lighting. It is a 120mm fan with standard 120mm mounting, but the 30mm thickness needs 5mm more clearance than a 25mm fan.














