| Model | PH-F120D30_DRGB_PWM_BK01_3P |
|---|---|
| Size | 120 mm |
| Thickness | 30 mm |
| Speed range | 250–2000 RPM |
| Max airflow | 64.3 CFM |
| Max pressure | 3.01 mmH₂O |
| Max noise | 30.2 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin JST D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks D30-120 is a 120 mm 30 mm fan rated 250-2000 RPM with 64.3 CFM and 3.01 mmH2O at 30.2 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks D30-120 120mm D-RGB Fan 3-Fan Pack
The D30-120 is a 30mm-thick 120mm fan, so it trades some case clearance for a deeper blade section than a standard 25mm model. Its 250-2000 RPM range covers low-speed idle running up to 2000 RPM, and the listed 64.3 CFM airflow with 3.01 mmH2O static pressure makes it a reasonable all-rounder: the pressure figure suits radiators, heatsinks and mesh or filter-restricted intakes, while the airflow figure keeps it usable as a general case fan. Phanteks rates noise at 30.2 dB(A), which is the figure to expect near the top of the range rather than at 250 RPM.
Each fan uses a Fluid Dynamic Bearing and a 4-Pin PWM daisy-chain connector plus a 3-Pin JST D-RGB header, so the three fans can share PWM control and addressable RGB from a compatible motherboard or controller. The 30mm thickness is the main fit check: confirm case, radiator and clearance before ordering. Colour is black. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks D30-120 quiet?
Phanteks lists noise at 30.2 dB(A), which is the rated figure rather than a measured result at every speed. The 250 RPM minimum lets you run it well below the 2000 RPM maximum for lower noise.
Is the D30-120 good for radiators or as a case fan?
It lists 3.01 mmH2O static pressure and 64.3 CFM airflow, so it can serve radiators, heatsinks and restricted intakes as well as general case airflow. The 30mm thickness needs clearance checking first.
What connectors does the D30-120 3-Fan Pack use?
Each fan has a 4-Pin PWM daisy-chain connector and a 3-Pin JST D-RGB connector for addressable lighting. You need a compatible PWM header and an ARGB header or controller; the data does not list a price.














