| Model | PH-F120D30_DRGB_PWM_BK01 |
|---|---|
| Size | 120 mm |
| Thickness | 30 mm |
| Speed range | 250–2000 RPM |
| Max airflow | 64.3 CFM |
| Max pressure | 3.01 mmH₂O |
| Max noise | 30.2 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin JST D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks D30-120 is a 120 mm 30 mm fan rated 250-2000 RPM with 64.3 CFM and 3.01 mmH2O at 30.2 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks D30-120 120mm D-RGB Fan
The D30-120 pairs a 30 mm thick frame with a 250-2000 RPM range, delivering 64.3 CFM of airflow and 3.01 mmH2O of static pressure. That balance suits both open case airflow and restricted paths such as radiators or dense mesh, where the higher static pressure figure matters more than raw CFM. Buyers choosing between the two should weigh the 3.01 mmH2O rating against the 64.3 CFM rating for their specific mounting.
Noise is rated at 30.2 dB(A), which is the manufacturer figure at its rated operating point rather than a measured result across the RPM range. The Fluid Dynamic Bearing is listed for the fan. Mounting uses standard 120 mm spacing, but the 30 mm thickness is deeper than typical 25 mm fans, so check clearance. Connection is a 4-Pin PWM daisy-chain plus a 3-Pin JST D-RGB header, and the ARGB lighting is black-finished. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks D30-120 quiet at 30.2 dB(A)?
Phanteks rates the D30-120 at 30.2 dB(A), which is the manufacturer's noise figure for the fan. Actual perceived noise depends on the RPM you run within the 250-2000 RPM range and on your case and mounting.
Is the D30-120 better for radiators or case airflow?
With 3.01 mmH2O static pressure and 64.3 CFM airflow, the D30-120 is listed with enough pressure for restricted paths like radiators, while the airflow figure also suits open case mounting. The data does not rank one use above the other.
Does the 30mm thickness fit my case and how does it connect?
The D30-120 is 120 mm wide but 30 mm thick, deeper than common 25 mm fans, so verify clearance at your mounting point. It connects via a 4-Pin PWM daisy-chain plus a 3-Pin JST D-RGB header for the ARGB lighting.














