| Model | PH-F120D30R_DRGB_PWM_BK01 |
|---|---|
| Size | 120 mm |
| Thickness | 30 mm |
| Speed range | 250–2000 RPM |
| Max airflow | 61.5 CFM |
| Max pressure | 2.72 mmH₂O |
| Max noise | 31.8 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM Daisy-chain + 3-Pin JST D-RGB |
| Lighting | ARGB |
| Colour | Black |
Phanteks D30-120 Reversed is a 120 mm 30 mm fan rated 250-2000 RPM with 61.5 CFM and 2.72 mmH2O at 31.8 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks D30-120 Reversed 120mm Reverse D-RGB Fan
The D30-120 Reversed runs from 250 to 2000 RPM and moves 61.5 CFM at 2.72 mmH2O of static pressure. That balance suits buyers pushing air through radiators, mesh or dust filters where pressure matters, while still delivering solid free-air flow. The 31.8 dB(A) rating is the manufacturer figure at full speed, so expect the fan to be audible at 2000 RPM and quieter toward the 250 RPM floor. The 30mm thickness is deeper than standard 25mm fans, so confirm clearance at your mounting points before buying.
A 4-Pin PWM daisy-chain connector lets several fans share one header chain, and the separate 3-Pin JST D-RGB link handles the ARGB lighting. The fluid dynamic bearing is the stated bearing type. The reversed blade design is intended for pull or exhaust orientation, so plan airflow direction around that. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Phanteks D30-120 Reversed quiet at full speed?
Phanteks rates it at 31.8 dB(A) at its 2000 RPM maximum, so it will be audible at full speed. The 250 RPM minimum lets you run it much slower for quieter operation, though the data does not list noise at lower speeds.
What is the D30-120 Reversed best used for?
With 61.5 CFM and 2.72 mmH2O static pressure, it suits radiator, mesh and filter setups where pressure is needed. The reversed blade design points it toward pull or exhaust mounting, so match it to your airflow direction.
Does the 30mm thickness affect fitting this fan?
Yes, the 30mm frame is thicker than common 25mm fans, so check clearance at your radiator, case or shroud mounting points. The 120mm diameter is standard, but the extra depth can matter in tight builds.














