| Model | TL-P12W |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 52.86 CFM |
| Max pressure | 1.53 mmH₂O |
| Max noise | 22.1 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
TL-P12W is a white silent tuned model rated up to 1500 rpm with 52.86 CFM and 1.53 mmH2O static pressure at 22.1 dBA
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-P12W 120mm Non-LED Fan
The TL-P12W is a 120mm, 25mm-thick white fan rated at 1500 RPM, moving 52.86 CFM at 1.53 mmH2O of static pressure. That balance suits case ventilation and airflow-first builds, while the moderate pressure still handles mild restrictions such as mesh fronts or a slim heatsink. Buyers pushing through dense radiators or thick filters should expect a lower-pressure fan to work harder to move the same air.
Noise is listed at 22.1 dB(A), so expect a quiet result at lower PWM duty and a modest rise as the fan approaches its 1500 RPM ceiling. The S-FDB bearing is the manufacturer's stated bearing type. Mounting uses standard 120mm spacing at 25mm thickness, and the 4-pin PWM connector requires a PWM-capable header or controller for speed control. No lighting is fitted. The data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-P12W a quiet fan?
Thermalright rates the TL-P12W at 22.1 dB(A) at up to 1500 RPM. That is a low noise figure, and PWM control lets you run it below maximum for quieter operation, though the data does not list noise at specific duty cycles.
Is the TL-P12W best for case airflow or radiators?
With 52.86 CFM and 1.53 mmH2O, the TL-P12W leans toward case airflow and ventilation. Its static pressure is moderate, so it can handle light restrictions, but the data does not describe radiator or heatsink performance.
Does the TL-P12W have RGB lighting and what size is it?
No, the TL-P12W is a non-LED fan with no lighting. It is a 120mm fan that is 25mm thick, so it fits standard 120mm mounting positions, and it uses a 4-pin PWM connector for speed control.















