| Model | TL-K12W-X28-R9 |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | –2400 RPM |
| Max airflow | 96.3 CFM |
| Max pressure | 3.15 mmH₂O |
| Max noise | 39.9 dBA |
| Bearing | S-FDB V2 Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | White |
TL-K12W-X28-R9 is a white thick frame nine blade model rated up to 2400 rpm with 96.3 CFM and 3.15 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-K12W-X28-R9 120mm ARGB Fan
The TL-K12W-X28-R9 is a 120mm fan with a 28mm frame, so it is thicker than standard 25mm models and needs a little more clearance at the mounting point. Its 2400 RPM maximum produces 96.3 CFM of airflow alongside 3.15 mmH2O of static pressure, a balance that suits both open case ventilation and resistance such as heatsinks or radiators. Buyers pushing air through dense fins should value the pressure figure; buyers filling a case panel can lean on the airflow number.
Noise is rated at 39.9 dB(A) at maximum speed, so expect audible operation when the fan runs flat out and quieter behaviour as PWM lowers the RPM. The S-FDB V2 bearing is listed as the bearing type. Connection uses a 4-pin PWM header for speed control plus a separate 3-pin 5V ARGB connector for lighting, so the board needs an ARGB header or controller. The white colour is listed; the data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-K12W-X28-R9 quiet at full speed?
The manufacturer rates it at 39.9 dB(A) at its 2400 RPM maximum, so it is audible at full speed. Because it uses 4-pin PWM, you can lower the RPM for quieter running, but the data lists no noise figures for lower speeds.
Is this fan better for a radiator or for case airflow?
It lists 3.15 mmH2O static pressure and 96.3 CFM airflow at 2400 RPM, so it has pressure for heatsinks and radiators while still moving high airflow. The data does not include radiator or case benchmark results, so match it to your own restriction level.
What connectors and size does the TL-K12W-X28-R9 need?
It is a 120mm fan that is 28mm thick, so allow extra clearance versus 25mm fans. It needs a 4-pin PWM header plus a 3-pin 5V ARGB connection for the lighting, and it is listed in white.















