| Model | Tranquil 140 ARGB |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 450–1500 RPM |
| Max airflow | 89.72 CFM |
| Max pressure | 1.82 mmH₂O |
| Max noise | 27.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Tranquil 140 ARGB is a 140 mm 25 mm fan rated 450-1500 RPM with 89.72 CFM and 1.82 mmH2O at 27.5 dBA
More Antec fans · All 140mm models · Browse the full fan database
About the Antec Tranquil 140 ARGB 140mm ARGB Fan
The Antec Tranquil 140 ARGB is a 140mm, 25mm-thick fan rated from 450 to 1500 RPM. Its 89.72 CFM airflow is high for a 140mm model, so it suits case intake and exhaust where moving large volumes of air matters more than pushing through dense restrictions. Static pressure is listed at 1.82 mmH2O, which is modest, so buyers mounting it against thick radiators or tight filters should weigh that figure carefully rather than assume radiator performance.
Noise is rated at 27.5 dB(A) at the top speed, and the 450 RPM minimum gives a low-speed option for quieter running. The fluid dynamic bearing is the bearing type Antec lists. Connection is a 4-pin PWM header for speed control plus a separate 3-pin ARGB header for lighting, so your board needs both. Colour is black and the fan is 25mm thick, a standard fit for most 140mm mounts. The data does not list a price or release year.
Frequently asked questions
Is the Antec Tranquil 140 ARGB quiet?
Antec rates it at 27.5 dB(A) at its 1500 RPM maximum, and it can run as low as 450 RPM via 4-pin PWM. The data does not list noise at lower speeds, so treat 27.5 dB(A) as the top-speed figure.
Is this fan better for case airflow or radiators?
Its 89.72 CFM airflow is high, while static pressure is a modest 1.82 mmH2O. That points to case intake and exhaust use. For thick radiators or dense filters, the listed pressure figure is the number to check against your setup.
What connectors and size does the Tranquil 140 ARGB need?
It is a 140mm fan, 25mm thick, with a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller must provide both headers for fan control and addressable lighting.













