| Model | flow FA12 3P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Grey |
flow FA12 3P is a 120 mm 25 mm grey fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 3-Pack Cool Grey Grey Fan
The HYTE flow FA12 3-Pack Cool Grey Grey is a 120mm, 25mm-thick fan running at a fixed 1500 RPM. Its 72 CFM airflow is the headline figure, making it a reasonable choice for case ventilation and open-airflow mounting where unrestricted intake or exhaust matters more than pressure. The 1.6 mmH2O static pressure is modest, so buyers pushing air through dense radiators or thick filters should weigh that number carefully rather than assume radiator performance.
Noise is rated at 28 dB(A), which tells you what to expect at that single speed since there is no lower RPM range. The 4-pin PWM connector is listed, though the fixed 1500 RPM means speed control depends on your header and settings. Fluid Dynamic Bearing is specified for longevity, and the grey colour with no lighting suits understated builds. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the HYTE flow FA12 3-Pack quiet enough for a silent build?
HYTE rates this fan at 28 dB(A) at its fixed 1500 RPM. That is the only noise figure listed, and because the minimum and maximum RPM are both 1500, there is no lower-speed mode to reduce noise further.
Is the HYTE flow FA12 3-Pack best for radiators or case airflow?
With 72 CFM airflow and 1.6 mmH2O static pressure, it leans toward case ventilation and low-restriction mounting. The static pressure figure is modest, so dense radiators and thick filters are a weaker fit according to the listed data.
Does the HYTE flow FA12 3-Pack have RGB lighting and what size is it?
No lighting is listed for this fan, and the colour is grey. It measures 120mm in diameter and 25mm thick, so it fits standard 120mm case and cooler mounts, and it uses a 4-pin PWM connector.















