| Model | flow FA12 4P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Pink |
flow FA12 4P is a 120 mm 25 mm pink fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 4-Pack Strawberry Milk Pink Fan
The HYTE flow FA12 4-Pack gives you four 120mm by 25mm fans that run at a fixed 1500 RPM. With 72 CFM of airflow and 1.6 mmH2O of static pressure, the balance leans toward open case ventilation and low-restriction mesh intakes rather than dense radiators or thick dust filters, where higher pressure is usually wanted. The 28 dB(A) rating is the manufacturer figure at that single speed, so expect one consistent noise level rather than a range.
Each fan uses a Fluid Dynamic Bearing and a 4-pin PWM connector, so they plug into standard motherboard headers, though the 1500 RPM minimum and maximum mean PWM control will not vary the speed much. There is no lighting, and the pink colour is the styling. The data does not list a price or release year, so check the retailer for current pricing on the four-pack.
Frequently asked questions
Are the HYTE flow FA12 fans quiet at 1500 RPM?
HYTE rates them at 28 dB(A) at their 1500 RPM speed. That is the only noise figure in the data, and because minimum and maximum RPM are both 1500, the fans run at one consistent speed rather than ramping up and down.
Is the HYTE flow FA12 4-Pack good for a radiator or an air cooler?
The data lists 72 CFM airflow and 1.6 mmH2O static pressure. That balance suits case ventilation and low-restriction mesh intakes; for dense radiators or thick filters, buyers typically look for higher static pressure than 1.6 mmH2O.
Do these fans have RGB and what size are they?
No, the data lists lighting as none, so there is no RGB. Each fan is 120mm in diameter and 25mm thick, with a 4-pin PWM connector and Fluid Dynamic Bearing, and the four-pack is finished in Strawberry Milk Pink.















