| Model | METAL PRO 12 ARGB PWM 3in1 |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 600–2200 RPM |
| Max airflow | 76.2 CFM |
| Max pressure | 3.81 mmH₂O |
| Max noise | 29.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
METAL PRO 12 ARGB PWM 3in1 is a 120 mm 28 mm black fan rated 600-2200 RPM 76.2 CFM and 3.81 mmH2O 29.1 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH METAL PRO 12 ARGB PWM 3-in-1 Pack Fan
The MONTECH METAL PRO 12 ARGB PWM is a 120mm fan with a 28mm frame, so check clearance where a standard 25mm fan fits tightly. Its 600–2200 RPM range spans low-speed idle running and full-speed loads. The 76.2 CFM airflow and 3.81 mmH2O static pressure suit radiators, heatsinks and mesh-front cases where pressure matters, while open low-restriction intakes need less. At 29.1 dB(A) the listed noise figure is the manufacturer's rating, so expect more audible output near 2200 RPM than at 600 RPM.
A 4-pin PWM connector handles speed control from the motherboard, and the separate 3-pin ARGB header drives the lighting, so your board needs an ARGB header or adapter. The fluid dynamic bearing is the stated bearing type. Colour is black. The data does not list a price or release year, so confirm those with the retailer. The 3in1 SKU suggests a multi-pack, but the listing does not state pack contents.
Frequently asked questions
Is the MONTECH METAL PRO 12 ARGB PWM quiet?
The manufacturer rates it at 29.1 dB(A), with a 600–2200 RPM range. Lower RPM should mean less noise, but the data gives no per-speed noise curve, so treat 29.1 dB(A) as the listed figure only.
Is this fan better for radiators or case airflow?
It lists 3.81 mmH2O static pressure and 76.2 CFM airflow, so it is specified for pressure-demanding spots such as radiators, heatsinks and mesh fronts. Open, low-restriction case positions need less pressure.
What connectors and size does it need?
It uses a 4-pin PWM connector plus a separate 3-pin ARGB header, so your motherboard needs both, or an ARGB adapter. The frame is 120mm wide and 28mm thick, so confirm 28mm clearance.















