| Model | GF120 ARGB PWM 3in1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1600 RPM |
| Max airflow | 66.3 CFM |
| Max pressure | 1.55 mmH₂O |
| Max noise | 25.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
GF120 ARGB PWM 3in1 is a 120 mm 25 mm white fan rated 800-1600 RPM 66.3 CFM and 1.55 mmH2O 25.5 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH GF120 ARGB PWM 3-in-1 Pack White Fan
The MONTECH GF120 ARGB PWM White is a 120mm fan with a 25mm thickness, so it fits standard 120mm case and cooler mounts. Its 66.3 CFM airflow at up to 1600 RPM suits open case ventilation and airflow-focused builds, while the 1.55 mmH2O static pressure is modest, so buyers pushing air through dense radiators or thick filters should weigh that figure carefully. The 800 RPM minimum lets the fan idle slower for less airflow and likely lower noise.
Montech rates noise at 25.5 dB(A), which is the manufacturer figure to expect rather than a measured review result. The hydraulic bearing is listed for durability, and the 4-pin PWM connector allows speed control from the motherboard; ARGB lighting uses a separate 3-pin ARGB header. The white colour suits light-themed builds. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the MONTECH GF120 ARGB PWM White a quiet fan?
Montech rates it at 25.5 dB(A), with a minimum speed of 800 RPM and a maximum of 1600 RPM. Actual noise depends on the speed you set through the 4-pin PWM connector, so lower RPM settings should reduce sound.
What is the GF120 ARGB PWM White best for?
With 66.3 CFM airflow and 1.55 mmH2O static pressure, it suits case airflow and ventilation rather than high-restriction radiators. Its 120mm size and 25mm thickness fit standard 120mm case and cooler mounts.
Does the MONTECH GF120 ARGB PWM White have RGB and what connector does it need?
Yes, it has ARGB lighting in white. It uses a 4-pin PWM connector for fan power and speed control plus a separate 3-pin ARGB connector for lighting, so your motherboard or controller needs a compatible ARGB header.















