| Model | flow FA12 4P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
flow FA12 4P is a 120 mm 25 mm white fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 4-Pack Snow White Fan
The HYTE flow FA12 4-Pack Snow White gives you four 120mm by 25mm fans, each running at a fixed 1500 RPM. With 72 CFM of airflow and 1.6 mmH2O of static pressure, these are balanced case fans rather than pressure-optimised radiator specialists. They suit open case intake and exhaust where moving air volume matters more than pushing through dense fins. At 28 dB(A), expect audible but moderate noise at full speed; the data lists no lower RPM range, so there is no listed quiet mode.
Each fan uses a Fluid Dynamic Bearing and a 4-pin PWM connector, so they fit standard motherboard headers and support PWM control where the board provides it. The white colour and lack of lighting suit clean, non-RGB builds. Mounting screws are not listed in the data, and neither is a price or release year, so check the retail listing for those details. The four-pack format is aimed at buyers filling a whole case in one purchase.
Frequently asked questions
Are the HYTE flow FA12 fans quiet at 1500 RPM?
The data rates each fan at 28 dB(A) at its 1500 RPM speed. That is a moderate noise level rather than a silent rating, and no lower RPM range is listed, so treat 28 dB(A) as the expected figure.
Is the HYTE flow FA12 4-Pack good for radiators or case airflow?
With 72 CFM airflow and 1.6 mmH2O static pressure, these fans lean toward case airflow rather than high-pressure radiator use. They are best suited to intake and exhaust positions where moving air volume is the priority.
Do the HYTE flow FA12 fans fit a standard 120mm mount and PWM header?
Yes, each fan is 120mm in diameter and 25mm thick with a 4-pin PWM connector, matching common 120mm case and cooler mounts and standard PWM fan headers. Mounting screws are not listed in the data.















