| Model | flow FA12 4P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Green |
flow FA12 4P is a 120 mm 25 mm green fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 4-Pack Matcha Milk Green Fan
The HYTE flow FA12 4-Pack Matcha Milk Green runs at a fixed 1500 RPM, moving 72 CFM with 1.6 mmH2O of static pressure. That airflow figure suits open case ventilation and mesh-front builds, while the modest static pressure means thick radiators or dense dust filters are not its strongest use case. Expect up to 28 dB(A) at full speed, so plan for a fan curve if silence matters.
Each fan is 120mm by 25mm with a 4-pin PWM connector, so standard motherboard headers and 120mm mounts fit without adapters. The fluid dynamic bearing is the listed bearing type, and there is no lighting, which keeps the green frame as the only visual accent. The data does not list a price, release year or per-fan warranty, so confirm those with the retailer before ordering the four-pack.
Frequently asked questions
Is the HYTE flow FA12 4-Pack quiet enough for a bedroom PC?
HYTE rates these fans at up to 28 dB(A) at their 1500 RPM maximum. The data lists no lower speed, so quiet operation depends on PWM control from your motherboard rather than a built-in low-noise mode.
Is the HYTE flow FA12 good for a radiator or an air cooler?
It offers 72 CFM airflow with 1.6 mmH2O static pressure. The airflow is the stronger number, so it suits case ventilation and mesh intakes better than high-resistance radiators or dense filters, where higher static pressure is usually preferred.
Does the HYTE flow FA12 4-Pack have RGB lighting and what size is it?
No, the data lists lighting as none, so the Matcha Milk Green colour is the only accent. Each fan is 120mm in diameter and 25mm thick with a 4-pin PWM connector, fitting standard 120mm case and cooler mounts.















