| Model | HF120 ARGB 3P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1600 RPM |
| Max airflow | 72.1 CFM |
| Max pressure | 1.98 mmH₂O |
| Max noise | 27 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
HF120 ARGB 3P is a 120 mm 25 mm black fan rated 500-1600 RPM 72.1 CFM and 1.98 mmH2O 27 dBA with ARGB lighting
More enermax fans · All 120mm models · Browse the full fan database
About the Enermax HF120 ARGB 3-Fan Pack Fan
The Enermax HF120 ARGB 3-Fan Pack uses 120 mm by 25 mm fans running from 500 to 1600 RPM. At full speed the listed airflow is 72.1 CFM with 1.98 mmH2O static pressure, a balance that suits open case ventilation and airflow-focused builds more than dense radiators or heavily restricted front intakes, where higher pressure fans are usually preferred. The rated noise is 27 dB(A) at maximum, so expect the quietest operation near the 500 RPM floor and the full 27 dB(A) figure only at 1600 RPM.
Each fan connects with a 4-pin PWM header for speed control plus a separate 3-pin ARGB connector, so your motherboard or controller needs both. The hydraulic bearing is the listed bearing type, and the colour is black. The data does not list a price, release year, or per-fan cable length, so check the retailer listing for those. Confirm your case or cooler accepts 120 mm fans at 25 mm thickness before buying the three-pack.
Frequently asked questions
Is the Enermax HF120 ARGB 3-Fan Pack quiet?
The rated noise is 27 dB(A) at the 1600 RPM maximum. Because the fans start at 500 RPM, PWM control lets you run them slower and quieter, but the data does not list noise at lower speeds.
What is the Enermax HF120 ARGB best for?
With 72.1 CFM airflow and 1.98 mmH2O static pressure, it suits case ventilation and airflow-focused builds. Dense radiators or restrictive intakes usually favor higher static pressure, which this data does not claim.
Do the HF120 ARGB fans fit my case and motherboard?
They are 120 mm diameter and 25 mm thick, so check your case or cooler supports that size. Each fan needs a 4-pin PWM header and a 3-pin ARGB connector for lighting control.















