| Model | METAL PRO 12 ARGB PWM 3in1 |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 600–2200 RPM |
| Max airflow | 76.2 CFM |
| Max pressure | 3.81 mmH₂O |
| Max noise | 29.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
METAL PRO 12 ARGB PWM 3in1 is a 120 mm 28 mm white fan rated 600-2200 RPM 76.2 CFM and 3.81 mmH2O 29.1 dBA
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH METAL PRO 12 ARGB PWM 3-in-1 Pack White Fan
The MONTECH METAL PRO 12 ARGB PWM White is a 120mm fan with a 28mm frame, so it is thicker than a standard 25mm fan and needs a little extra clearance at the mounting point. Its 600–2200 RPM range covers low-speed idle running up to full-speed load, and the 3.81 mmH2O static pressure figure suits pushing air through dense fins, mesh or filters, while the 76.2 CFM airflow figure describes open-air movement. Buyers should weigh both numbers against their case or cooler rather than airflow alone.
Noise is rated at 29.1 dB(A), which is the manufacturer figure at its rated operating point, so expect quieter running toward the 600 RPM minimum. The fluid dynamic bearing is listed, along with a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting, so the board needs both a PWM header and an ARGB header. The data does not list a price or release year.
Frequently asked questions
Is the MONTECH METAL PRO 12 ARGB PWM White quiet?
Montech rates it at 29.1 dB(A). The fan runs from 600 to 2200 RPM, so lower speeds should be quieter, but the data does not give noise figures for individual RPM points.
Is this fan better for a radiator or for case airflow?
It lists 3.81 mmH2O static pressure and 76.2 CFM airflow, so it is specified for both pressure-restricted spots such as radiators, fins and filters and for general case airflow. The data does not include cooling benchmarks.
What connectors and clearance does it need?
It uses a 4-pin PWM connector plus a separate 3-pin ARGB connector, so both headers are required. The 120mm fan is 28mm thick, which is thicker than a standard 25mm fan, so check mounting clearance.















