| Model | RX120 PRO 3in1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1600 RPM |
| Max airflow | 72.3 CFM |
| Max pressure | 1.85 mmH₂O |
| Max noise | 27.8 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
RX120 PRO 3in1 is a 120 mm 25 mm black fan rated 600-1600 RPM 72.3 CFM and 1.85 mmH2O 27.8 dBA with ARGB lighting
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH RX120 PRO 3-in-1 Pack Fan
The MONTECH RX120 PRO is a 120mm by 25mm fan, so it fits the standard 120mm case and cooler mounts. Its 72.3 CFM airflow figure is the headline for case ventilation, while 1.85 mmH2O static pressure is modest, so it suits open case airflow more than dense radiators or thick heatsinks. The 600 to 1600 RPM PWM range lets the board dial speed down at idle and up under load.
Noise is rated at 27.8 dB(A) at the top end, so expect the fan to be audible at full speed and quieter when PWM lowers the RPM. The 4-pin PWM connector needs a fan header, and the separate 3-pin ARGB connector needs an ARGB header or controller for the lighting. The bearing is listed as sleeve, which is worth noting for long-term use. The data does not list a price or release year.
Frequently asked questions
Is the MONTECH RX120 PRO quiet?
Montech rates it at 27.8 dB(A), with PWM control from 600 to 1600 RPM. The data gives only that single noise figure, so lower speeds should be quieter, but no per-RPM noise values are listed.
What is the MONTECH RX120 PRO best for?
With 72.3 CFM airflow and 1.85 mmH2O static pressure, it is better suited to case intake and exhaust than to high-resistance radiators. The 120mm size fits standard 120mm mounts.
Does the MONTECH RX120 PRO have RGB, and what connectors does it need?
Yes, it has ARGB lighting. It uses a 4-pin PWM connector for the fan and a separate 3-pin ARGB connector for the lighting, so your motherboard or controller needs both a fan header and an ARGB header.















