| Model | flow FA12 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Red |
flow FA12 is a 120 mm 25 mm red fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 Red Red Fan
The HYTE flow FA12 Red Red is a 120mm by 25mm fan that runs at a fixed 1500 RPM, moving 72 CFM with 1.6 mmH2O of static pressure. That balance suits case ventilation and airflow-focused builds, while the modest static pressure means thick radiators or dense filters are not its strongest use case. At 28 dB(A), expect audible but moderate noise at full speed; the data lists no lower speed range, so it does not document a quieter idle mode.
Mounting follows standard 120mm spacing at 25mm thickness, and the 4-pin PWM connector supports speed control from a compatible header. The fluid dynamic bearing is the listed bearing type, and the red frame has no lighting. The data does not list a price or release year, so check the retailer for current pricing before buying.
Frequently asked questions
Is the HYTE flow FA12 Red Red quiet at 1500 RPM?
HYTE rates it at 28 dB(A) at its 1500 RPM speed. The data lists no lower RPM range, so there is no documented quieter setting; treat 28 dB(A) as the expected noise figure.
Is the HYTE flow FA12 Red Red good for a radiator or case airflow?
With 72 CFM and 1.6 mmH2O, it leans toward case airflow rather than high-impedance radiators. Its static pressure is modest, so dense fins or restrictive filters may not suit it as well.
Does the HYTE flow FA12 Red Red have RGB lighting?
No. The data lists lighting as none, and the fan is red in colour. It uses a 4-pin PWM connector, so speed control depends on your motherboard header or controller rather than any lighting feature.















