| Model | flow FA12 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
flow FA12 is a 120 mm 25 mm white fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 Snow White Fan
The HYTE flow FA12 Snow White is a 120mm, 25mm-thick fan that runs at a fixed 1500 RPM, so there is no PWM speed range to tune in the data. At 72 CFM it moves a solid amount of air, while its 1.6 mmH2O static pressure is modest, which points to case ventilation and open-airflow mounting rather than dense radiators or heavily restricted intakes. Buyers pushing air through thick heatsinks or tight filters should weigh that figure carefully.
Noise is listed at 28 dB(A), a mid-range figure you should expect at full speed since the fan has no lower operating point in the specs. The Fluid Dynamic Bearing is the durability detail to note, and the 4-pin PWM connector fits standard motherboard headers even though the listed speed is fixed. Lighting is listed as None, and the colour is white. The data does not list a price or release year.
Frequently asked questions
Is the HYTE flow FA12 Snow White quiet at 1500 RPM?
The manufacturer lists noise at 28 dB(A). Because the fan runs at a fixed 1500 RPM with no lower speed in the data, that figure represents its normal operating level rather than a minimum.
Is the HYTE flow FA12 Snow White good for a radiator or an air cooler?
Its 1.6 mmH2O static pressure is modest, while airflow is 72 CFM. That suits case ventilation and low-restriction mounting better than dense radiators or thick heatsinks, where higher static pressure is usually preferred.
Does the HYTE flow FA12 Snow White have RGB, and what connector does it use?
Lighting is listed as None, so there is no RGB on this white model. It uses a 4-pin PWM connector, which fits standard motherboard fan headers, and the listed speed is a fixed 1500 RPM.















