| Model | flow FA12 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Grey |
flow FA12 is a 120 mm 25 mm grey fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 Cool Grey Grey Fan
The HYTE flow FA12 Cool Grey Grey is a 120 mm fan with a 25 mm frame that runs at a fixed 1500 RPM. Its 72 CFM airflow is the headline number, while 1.6 mmH2O static pressure is modest, so it suits open case ventilation and low-restriction mesh or grille positions better than dense radiators or thick dust filters. Buyers pushing air through restrictive obstacles should expect the pressure side to be the limiting factor.
Noise is rated at 28 dB(A), which is a moderate figure rather than a silent one, so plan fan curves and placement with that in mind. The fluid dynamic bearing is the stated bearing type, and the 4-pin PWM connector means speed control depends on the header and settings you use, though the listed range is 1500 RPM minimum and maximum. There is no lighting. The data does not list a price or release year.
Frequently asked questions
Is the HYTE flow FA12 Cool Grey Grey quiet at 1500 RPM?
HYTE rates this fan at 28 dB(A), which is a moderate noise level rather than a silent rating. Because the listed speed range is 1500 RPM minimum and maximum, the data does not describe lower-speed operation.
Is the HYTE flow FA12 best for case airflow or radiators?
With 72 CFM airflow and 1.6 mmH2O static pressure, it is better suited to case ventilation and low-restriction mounting positions. The modest pressure figure makes it a weaker match for dense radiators or heavily filtered intakes.
What size opening and connector does the HYTE flow FA12 need?
It is a 120 mm fan with a 25 mm thickness, so it fits standard 120 mm mounting spacing that accepts 25 mm frames. It uses a 4-pin PWM connector and has no lighting.















