| Model | HF120 ARGB 3P |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1600 RPM |
| Max airflow | 72.1 CFM |
| Max pressure | 1.98 mmH₂O |
| Max noise | 27 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
HF120 ARGB 3P is a 120 mm 25 mm white fan rated 500-1600 RPM 72.1 CFM and 1.98 mmH2O 27 dBA with ARGB lighting
More enermax fans · All 120mm models · Browse the full fan database
About the Enermax HF120 ARGB 3-Fan Pack White Fan
The Enermax HF120 ARGB 3-Fan Pack White is a 120mm, 25mm-thick fan set with a 500-1600 RPM range, so it can idle quietly or ramp up when load rises. Its 72.1 CFM airflow suits open case ventilation and mesh-front intakes, while the 1.98 mmH2O static pressure is modest, so buyers mounting it against dense radiators or thick filters should weigh that figure carefully rather than assume strong pressure performance.
Noise is rated at 27 dB(A), which gives a realistic expectation for the top of the speed range. Each fan uses a hydraulic bearing and a 4-pin PWM connector for speed control plus a separate 3-pin ARGB connector for lighting, so your motherboard or controller needs both headers. The white colour and ARGB lighting suit light-themed builds. The data does not list a price or release year, so check the retailer listing for current cost.
Frequently asked questions
Is the Enermax HF120 ARGB 3-Fan Pack White quiet?
The manufacturer rates it at 27 dB(A) at its maximum 1600 RPM, with a minimum speed of 500 RPM via 4-pin PWM. The data does not list noise at lower speeds, so expect quieter running when PWM reduces RPM.
Is this fan better for case airflow or radiators?
Its 72.1 CFM airflow is the stronger figure, while static pressure is 1.98 mmH2O. That suggests it suits case intake and exhaust ventilation better than dense radiators or thick filters, where higher pressure is usually preferred.
What connectors does the HF120 ARGB 3-Fan Pack need?
Each fan uses a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or ARGB controller must provide both header types, and the fans are 120mm wide and 25mm thick.















