| Model | Neptune AN120 IW-FN-AN120-3PK |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 900–2200 RPM |
| Max airflow | 60.1 CFM |
| Max pressure | 2.27 mmH₂O |
| Max noise | 20.5 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Neptune AN120 IW-FN-AN120-3PK is a 120 mm 25 mm black fan rated 900-2200 RPM 60.1 CFM and 2.27 mmH2O 20.5 dBA
More InWin fans · All 120mm models · Browse the full fan database
About the InWin Neptune AN120 3-Pack Fan
The Neptune AN120 is a 120mm, 25mm-thick fan running from 900 to 2200 RPM, with 60.1 CFM airflow and 2.27 mmH2O static pressure. That balance suits both case ventilation and airflow-restricted spots such as radiators or dense front intakes, where pressure matters more than raw CFM. The 20.5 dB(A) rating is the manufacturer's figure at its tested speed, so expect louder operation near the 2200 RPM ceiling and quieter running toward 900 RPM.
Each fan uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB header for lighting, so your motherboard or controller needs both. The sleeve bearing is a simple, low-cost design; the data does not list an MTBF or warranty figure. Mounting is standard 120mm at 25mm thickness, fitting most cases and coolers. The 3-pack is sold as a multi-fan set, but the data does not list a price or release year.
Frequently asked questions
Is the InWin Neptune AN120 3-Pack quiet enough for a silent build?
InWin rates it at 20.5 dB(A), with a 900 to 2200 RPM range. Running near the 900 RPM minimum should be quieter than full speed, but the data does not specify the RPM at which the 20.5 dB(A) figure was measured.
What is the Neptune AN120 best used for — case airflow or radiators?
With 60.1 CFM and 2.27 mmH2O static pressure, it is balanced for both. The pressure figure makes it usable on radiators and restricted intakes, while the airflow suits general case ventilation in a 120mm, 25mm-thick mount.
Does the InWin Neptune AN120 3-Pack include ARGB and what connectors does it need?
Yes, it has ARGB lighting. Each fan uses a 4-pin PWM connector for fan speed plus a separate 3-pin ARGB connector for lighting, so your motherboard or controller must provide both headers. The data does not list an included controller or price.















