| Model | HURRICANE 120 ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–2000 RPM |
| Max airflow | 61.5 CFM |
| Max pressure | 1.42 mmH₂O |
| Max noise | 18.17 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
HURRICANE 120 ARGB is a 120 mm 25 mm black fan rated 600-2000 RPM 61.5 CFM and 1.42 mmH2O 18.17 dBA
More XPG fans · All 120mm models · Browse the full fan database
About the XPG HURRICANE 120 ARGB Fan
The XPG HURRICANE 120 ARGB is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounts. Its 600–2000 RPM PWM range lets the motherboard scale speed to load, and the 4-pin connector is the usual header type for that control. Buyers should read the two headline figures together: 61.5 CFM of airflow suits open case ventilation and exhaust roles, while 1.42 mmH2O of static pressure is modest, so it is a better fit for low-restriction case positions than for dense radiators or thick heatsinks.
The rated noise is 18.17 dB(A), which is the manufacturer's figure rather than a measured result, so treat it as a specification to compare against other fans. The fluid dynamic bearing is listed as the bearing type. ARGB lighting is included, and the fan is black. The data does not list a price or a release year, so neither can be confirmed here.
Frequently asked questions
Is the XPG HURRICANE 120 ARGB a quiet fan?
XPG rates it at 18.17 dB(A). That is the manufacturer's published noise figure, not an independent measurement, so compare it against other fans rated under the same conditions. Actual noise will vary with the 600–2000 RPM speed you run.
What is the XPG HURRICANE 120 ARGB best used for?
With 61.5 CFM airflow and 1.42 mmH2O static pressure, it suits low-restriction case intake and exhaust positions. The modest static pressure means dense radiators and thick heatsinks are less ideal, based on the listed figures alone.
Does the XPG HURRICANE 120 ARGB fit a standard 120mm mount and support ARGB?
Yes. It is a 120mm fan with a 25mm thickness, a common size for 120mm case and cooler mounts. It uses a 4-pin PWM connector for speed control and includes ARGB lighting. The data does not list a price.














