| Model | flow FA12 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 72 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Purple |
flow FA12 is a 120 mm 25 mm purple fan rated 1500 RPM 72 CFM and 1.6 mmH2O 28 dBA
More HYTE fans · All 120mm models · Browse the full fan database
About the HYTE flow FA12 Taro Milk Purple Fan
The HYTE flow FA12 Taro Milk Purple is a 120mm, 25mm-thick fan with a fixed 1500 RPM speed, so there is no PWM speed range to tune beyond what your 4-pin header controls. Its 72 CFM airflow and 1.6 mmH2O static pressure sit in a balanced middle ground: strong enough for case ventilation and light radiator or heatsink duty, but buyers pushing through dense fins or filters should note the modest pressure figure rather than expect a high-pressure specialist.
Noise is rated at 28 dB(A), which is a moderate figure for a 1500 RPM fan and worth weighing if silence is your priority. The fluid dynamic bearing is the durability spec listed, and the 4-pin PWM connector fits standard motherboard fan headers. Lighting is listed as none, and the colour is purple. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the HYTE flow FA12 Taro Milk Purple quiet?
HYTE rates this fan at 28 dB(A) at its fixed 1500 RPM. That is a moderate noise figure, so it is reasonable for general case airflow but not a silent-focused pick if low noise is your main goal.
What is the HYTE flow FA12 best used for?
With 72 CFM airflow and 1.6 mmH2O static pressure, it suits case ventilation and lighter radiator or heatsink use. Dense fins or restrictive filters may favour a higher static-pressure fan, since 1.6 mmH2O is modest.
Does the HYTE flow FA12 have RGB lighting?
No. The manufacturer data lists lighting as none, so this fan is a plain purple model without RGB. It uses a 4-pin PWM connector for power and control from a standard motherboard fan header.















