| Model | Neptune DN140 PRO |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 900–1800 RPM |
| Max airflow | 91.66 CFM |
| Max pressure | 2.95 mmH₂O |
| Max noise | 24 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Neptune DN140 PRO is a 140 mm 25 mm black fan rated 900-1800 RPM 91.66 CFM and 2.95 mmH2O 24 dBA
More InWin fans · All 140mm models · Browse the full fan database
About the InWin Neptune DN140 PRO Fan
The InWin Neptune DN140 PRO is a 140mm, 25mm-thick PWM fan built around a fluid dynamic bearing. Its 91.66 CFM airflow and 2.95 mmH2O static pressure sit in a balanced range, so it can move air through open case panels while still pushing through a radiator or dense mesh where pressure matters more than raw volume. The 900 to 1800 RPM range lets you tune that trade-off yourself.
At 24 dB(A) the fan is specified for low-noise operation, though the data does not state the test distance or the RPM at which that figure was measured. The 4-pin PWM connector suits standard motherboard headers with speed control. It is 140mm wide and 25mm thick, so check clearance in tight mounts. Lighting is listed as none and the colour is black. The manufacturer data does not list a price or release year.
Frequently asked questions
Is the InWin Neptune DN140 PRO a quiet fan?
InWin rates it at 24 dB(A), which is a low noise figure on paper. The data does not specify the test distance or the exact RPM for that measurement, so treat it as a manufacturer rating rather than a guarantee.
Is the Neptune DN140 PRO better for case airflow or radiators?
It offers 91.66 CFM airflow and 2.95 mmH2O static pressure, a balanced pairing. That makes it suitable for both open case ventilation and radiators or mesh, with the 900 to 1800 RPM range letting you favour one or the other.
Does the InWin Neptune DN140 PRO have RGB lighting?
No. The manufacturer lists lighting as none, and the fan colour is black. It is a plain black 140mm fan with a 4-pin PWM connector, so there are no addressable or fixed LEDs to wire up or control.















