| Model | DF-12025-ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 900–2000 RPM |
| Max airflow | 56.5 CFM |
| Max pressure | 1.99 mmH₂O |
| Max noise | 31.5 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DF-12025-ARGB is a 120 mm 25 mm black fan rated 900-2000 RPM 56.5 CFM and 1.99 mmH2O 31.5 dBA with ARGB lighting
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING DF-12025-ARGB Fan
The DF-12025-ARGB is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounts. Its 56.5 CFM airflow suits open case ventilation and low-restriction mesh or grille positions, while the 1.99 mmH2O static pressure is modest, so buyers pushing air through dense radiators or thick filters should expect it to be less effective there than a high-pressure design. The 900–2000 RPM range lets you run it slow for everyday airflow or ramp it up under load.
At full speed ID-COOLING rates noise at 31.5 dB(A), so expect audible airflow at 2000 RPM and quieter operation toward the 900 RPM floor. The dual ball bearing is listed, though the data does not state a lifespan figure. A 4-pin PWM header controls speed, and a separate 3-pin ARGB connection handles lighting, so your board or controller needs both. Colour is black. The data does not list a price or release year.
Frequently asked questions
Is the ID-COOLING DF-12025-ARGB quiet?
ID-COOLING rates it at 31.5 dB(A) at its 2000 RPM maximum. It can run as low as 900 RPM, so you can reduce speed for less noise, but the data does not list noise figures for lower speeds.
What is the DF-12025-ARGB best used for?
With 56.5 CFM airflow and 1.99 mmH2O static pressure, it suits case ventilation and low-restriction mounts. The static pressure is modest, so dense radiators and thick filters are not its strongest use according to the listed numbers.
What connectors and size does the DF-12025-ARGB need?
It is a 120mm fan with a 25mm thickness, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for fan speed plus a separate 3-pin ARGB connector for lighting, so both headers are required.















