| Model | DF-12025-ARGB Trio |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 900–2000 RPM |
| Max airflow | 56.5 CFM |
| Max pressure | 1.99 mmH₂O |
| Max noise | 31.5 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DF-12025-ARGB Trio is a 120 mm 25 mm black fan rated 900-2000 RPM 56.5 CFM and 1.99 mmH2O 31.5 dBA
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING DF-12025-ARGB Trio 3-Pack Fan
The DF-12025-ARGB Trio 3-Pack gives buyers three 120mm by 25mm fans with a 900 to 2000 RPM range. At 56.5 CFM airflow against 1.99 mmH2O static pressure, these sit toward airflow duty rather than high-impedance radiator work, so they suit case intake and exhaust and open-airframe cooling more than dense fin stacks. The 31.5 dB(A) figure is the manufacturer's rating at the top end, so expect the loudest point at 2000 RPM and quieter running toward 900 RPM.
Each fan uses dual ball bearings, a 4-pin PWM connector for speed control and a separate 3-pin ARGB header for lighting, so your motherboard needs both a PWM fan header and an ARGB header per fan or a splitter arrangement. The black frame and ARGB lighting are listed; mounting screws and any included hub are not specified in the data. Price and release year are not listed in the supplied data.
Frequently asked questions
Is the ID-COOLING DF-12025-ARGB Trio 3-Pack quiet?
The data lists 31.5 dB(A) as the noise figure, which corresponds to the 2000 RPM maximum. Because the fans run from 900 RPM via 4-pin PWM, you can lower speed for less noise, but no lower-RPM noise value is listed.
What is this 3-pack best used for?
With 56.5 CFM airflow and 1.99 mmH2O static pressure, the fans favor case airflow such as intake and exhaust rather than high-pressure radiator or dense heatsink use. The 120mm by 25mm size fits standard 120mm mounting positions.
Does the DF-12025-ARGB Trio need special headers?
Yes. Each fan uses a 4-pin PWM connector plus a separate 3-pin ARGB connector, so you need a PWM fan header and an ARGB header. The data does not list an included hub, splitter, or mounting screws, so check your motherboard and case accessories.















