| Model | SquA RGB UCSQARGB12P-SG |
|---|---|
| Size | 120 mm |
| Thickness | 26 mm |
| Speed range | 300–1500 RPM |
| Max airflow | 68.27 CFM |
| Max pressure | 1.898 mmH₂O |
| Max noise | 23 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
SquA RGB UCSQARGB12P-SG is a 120 mm 26 mm black fan rated 300-1500 RPM 68.27 CFM and 1.898 mmH2O 23 dBA
More enermax fans · All 120mm models · Browse the full fan database
About the Enermax SquA RGB 120 Black Fan
The Enermax SquA RGB 120 Black is a 120mm fan with 26mm thickness, so it fits standard 120mm mounts and most case or radiator positions. Its 68.27 CFM airflow at up to 1500 RPM suits open case ventilation and low-restriction intake or exhaust, while the 1.898 mmH2O static pressure is modest for dense radiators or thick filters. Buyers should match it to airflow-focused builds rather than high-impedance cooling setups.
The hydraulic bearing and 23 dB(A) rating suggest a quiet-leaning fan, with the 300 RPM minimum allowing low-speed idle operation. The 4-pin PWM connector handles speed control, and the separate 3-pin ARGB connector requires an ARGB header or controller for lighting. The data does not list a price or release year, so check current listings for cost.
Frequently asked questions
Is the Enermax SquA RGB 120 Black quiet?
The manufacturer rates it at 23 dB(A) with a hydraulic bearing and a 300 RPM minimum, so it is specified as a quiet fan at lower speeds. Actual noise depends on your PWM curve and system.
What is the Enermax SquA RGB 120 Black best for?
With 68.27 CFM and 1.898 mmH2O, it suits case airflow, intake and exhaust positions, and low-restriction setups. Its static pressure is modest for dense radiators or heavy filters.
Does the Enermax SquA RGB 120 Black need a special connector?
It uses a 4-pin PWM connector for fan speed and a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs a compatible ARGB header to run the RGB.















