| Model | CL-F216-PL12GS-A |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 68 CFM |
| Max pressure | 2.95 mmH₂O |
| Max noise | 28.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | Gravel Sand |
CL-F216-PL12GS-A is a 25 mm thick 120 mm ARGB fan reaching 2000 RPM with 68 CFM and 2.95 mmH2O static pressure
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake CT120 EX ARGB Sync Gravel Sand 3-Fan Pack
The CT120 EX ARGB Sync Gravel Sand 3-Fan Pack uses 120 mm fans that are 25 mm thick, so they suit standard 120 mm case and cooler mounts. The 68 CFM airflow figure points to strong open-air case ventilation, while the 2.95 mmH2O static pressure figure means the fans can also push through radiators and dense filters. With a 500 to 2000 RPM range, buyers can run them slowly for quieter everyday use or raise speed when more airflow is needed. The listed noise figure is 28.5 dB(A), which is the manufacturer's rating rather than a measured result.
Each fan uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB connector for lighting, so the motherboard needs both a PWM header and an ARGB header. The hydraulic bearing is the stated bearing type. Colour is Gravel Sand, and the pack contains three fans. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Are the Thermaltake CT120 EX ARGB Sync fans quiet?
The manufacturer lists 28.5 dB(A) as the noise figure. Actual noise depends on the RPM you set, and the 500 RPM minimum lets you run the fans slower for quieter operation.
What are these fans best for?
With 68 CFM airflow and 2.95 mmH2O static pressure, they suit both open case ventilation and restricted setups such as radiators or filtered intakes. The 120 mm size fits standard 120 mm mounts.
What connectors do the CT120 EX ARGB Sync fans need?
Each fan uses a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs both a PWM header and an ARGB header.















