No official product photo is published for this model. Specifications below are sourced from the manufacturer's own documentation.
| Model | HURRICANE MAG 120 Reverse |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 300–2000 RPM |
| Max airflow | 49.27 CFM |
| Max pressure | 3.29 mmH₂O |
| Max noise | 31.36 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
HURRICANE MAG 120 Reverse is a 120 mm 25 mm black fan rated 300-2000 RPM 49.27 CFM and 3.29 mmH2O 31.36 dBA
More XPG fans · All 120mm models · Browse the full fan database
About the XPG HURRICANE MAG 120 Reverse Fan
The XPG HURRICANE MAG 120 Reverse is a 120mm, 25mm-thick ARGB fan built for buyers who need pressure rather than pure volume. Its 3.29 mmH2O static pressure is the standout figure, making it a sensible pick for heatsinks, radiators or restrictive front intakes, while the 49.27 CFM airflow is moderate and suits case ventilation rather than high-volume open-air setups. The 300–2000 RPM range gives a wide spread between near-silent idle running and full-speed load use.
Noise is rated at 31.36 dB(A), so expect audible airflow at the top of the range and much quieter behaviour near 300 RPM. The sleeve bearing is a simple, low-cost design; the data does not list a rated lifespan or warranty. Mounting is standard 120mm with 25mm thickness, and the 4-pin PWM plus 3-pin ARGB connectors require a PWM header and an ARGB header on your board or controller. The data does not list a price or release year.
Frequently asked questions
Is the XPG HURRICANE MAG 120 Reverse quiet at low RPM?
The fan spans 300 to 2000 RPM with a rated noise of 31.36 dB(A) at its maximum. Running near the 300 RPM minimum should be far quieter, but the data only lists the single maximum noise figure, not per-RPM values.
Is this fan better for a radiator or for case airflow?
Its 3.29 mmH2O static pressure is high relative to its 49.27 CFM airflow, so it suits radiators, heatsinks and restrictive intakes. For open case ventilation where raw airflow matters more, the 49.27 CFM figure is moderate rather than high.
What connectors and size does the XPG HURRICANE MAG 120 Reverse need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for fan control plus a separate 3-pin ARGB connector, so your motherboard or controller needs both a PWM header and an ARGB header.















