| Model | Dark Force 9cm |
|---|---|
| Size | 92 mm |
| Thickness | 25 mm |
| Speed range | 1800–1800 RPM |
| Bearing | Sleeve Bearing |
| Connector | 3-pin |
| Lighting | None |
| Colour | Black |
Dark Force 9cm is a 92 mm 25 mm black fan rated 1800 RPM for PC cases radiators and CPU coolers
More AeroCool fans · All 92mm models · Browse the full fan database
About the AeroCool Dark Force 9cm Fan
The AeroCool Dark Force 9cm is a 92mm fan with a 25mm thickness, so it fits standard 92mm mounting positions and replaces stock case or cooler fans of the same size. It runs at a fixed 1800 RPM with no PWM range, meaning it always spins at one speed rather than ramping with system load. That single speed suits buyers who want steady, predictable airflow in a small case or on a budget cooler, though the data does not list an airflow or static-pressure figure, so check whether your heatsink needs high pressure before buying.
The sleeve bearing and 3-pin connector are the key practical details. A sleeve bearing is typically the simplest, lowest-cost bearing type, and the manufacturer data does not list a noise level or rated lifespan, so expect basic rather than premium acoustics. The 3-pin connector plugs into a standard fan header and runs at full speed unless your board or a controller adjusts voltage. The black frame has no lighting. Price and release year are not listed in the data.
Frequently asked questions
Is the AeroCool Dark Force 9cm quiet?
The manufacturer data does not list a noise level in dB or an airflow figure, so a specific quietness claim cannot be made. It runs at a fixed 1800 RPM on a sleeve bearing, which is a basic bearing type rather than a low-noise design.
What is the AeroCool Dark Force 9cm best used for?
With a 92mm diameter, 25mm thickness and fixed 1800 RPM, it suits standard 92mm case or cooler mounting points needing steady airflow. The data does not list static pressure, so confirm suitability for dense heatsinks before buying.
Does the AeroCool Dark Force 9cm have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It uses a 3-pin connector rather than a 4-pin PWM header, so it runs at its single 1800 RPM speed unless voltage is adjusted by your board or controller.















