| Model | SL-925B |
|---|---|
| Size | 92 mm |
| Thickness | 25 mm |
| Speed range | 800–2200 RPM |
| Max airflow | 38.2 CFM |
| Max pressure | 2.0 mmH₂O |
| Max noise | 33.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | PWM 4-Pin + ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
SL-925B is a 25 mm thick 92 mm fan reaching 2200 RPM with 38.2 CFM and 2.0 mmH2O static pressure
More JONSBO fans · All 92mm models · Browse the full fan database
About the JONSBO SL-925B ARGB 92mm Fan (Black)
The SL-925B is a 92mm, 25mm-thick fan that spans 800 to 2200 RPM, so it can idle quietly or push harder under load. Its 38.2 CFM airflow and 2.0 mmH2O static pressure make it a reasonable fit for small cases and compact coolers, and the pressure figure suggests it can cope with some resistance such as a heatsink or a tight mesh panel rather than only open-air exhaust.
At full speed JONSBO rates noise at 33.8 dB(A), so expect an audible fan at 2200 RPM and a quieter result near the 800 RPM floor. The hydraulic bearing is the stated bearing type. It connects via PWM 4-pin for speed control plus a separate ARGB 3-pin header, so your motherboard needs both. Colour is black and lighting is ARGB. The data does not list a price or release year.
Frequently asked questions
Is the JONSBO SL-925B ARGB fan quiet?
JONSBO rates it at 33.8 dB(A) at its 2200 RPM maximum, so it is audible at full speed. Because the range starts at 800 RPM, PWM control lets you run it slower for a quieter result.
What is the JONSBO SL-925B best used for?
With 38.2 CFM airflow and 2.0 mmH2O static pressure, it suits compact 92mm case mounts and small coolers where some resistance exists. The data does not list specific cooler or case compatibility.
Does the SL-925B need both PWM and ARGB headers?
Yes. It uses a PWM 4-pin connector for fan speed control and a separate ARGB 3-Pin connector for lighting. Your motherboard or controller needs both headers to use speed control and addressable RGB together.















