| Model | Cube A120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 70.95 CFM |
| Max pressure | 2.06 mmH₂O |
| Max noise | 36.8 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
Cube A120 is a 120 mm 25 mm white fan rated 500-1800 RPM 70.95 CFM and 2.06 mmH2O 36.8 dBA with ARGB lighting
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Cube A120 White Fan
The AeroCool Cube A120 White balances airflow and pressure for a 120mm fan. Its 70.95 CFM rating points to strong case ventilation, while 2.06 mmH2O static pressure is modest, so it suits open case airflow more than dense radiators or thick filters. The 500–1800 RPM range lets you run it slow for everyday use or ramp it up under load.
Noise is rated at 36.8 dB(A), which is a figure to expect near the top of the speed range rather than at 500 RPM. The fan is 25mm thick, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB header for lighting, so your motherboard needs both. The sleeve bearing is a simple, low-cost design. The manufacturer data does not list a price or release year.
Frequently asked questions
Is the AeroCool Cube A120 White quiet?
The rated noise is 36.8 dB(A), which reflects the fan near its 1800 RPM maximum. At the 500 RPM minimum it should be much quieter, but the data does not list noise at lower speeds.
Is the Cube A120 White good for a radiator or case airflow?
With 70.95 CFM and 2.06 mmH2O static pressure, it is better suited to case airflow than to dense radiators or restrictive filters, where higher static pressure is usually preferred.
What connectors does the Cube A120 White need?
It uses a 4-pin PWM connector for fan speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller must provide both headers for PWM control and addressable RGB.















