| Model | Cube A120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 70.95 CFM |
| Max pressure | 2.06 mmH₂O |
| Max noise | 36.8 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Cube A120 is a 120 mm 25 mm black fan rated 500-1800 RPM 70.95 CFM and 2.06 mmH2O 36.8 dBA with ARGB lighting
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Cube A120 Fan
The AeroCool Cube A120 is a 120mm by 25mm fan built around a 500 to 1800 RPM range, so it can idle quietly or ramp up when load demands it. Its 70.95 CFM airflow figure points to case ventilation and general intake or exhaust duty, while the 2.06 mmH2O static pressure is modest, so it is a safer fit for open case airflow than for dense radiators or thick heatsinks.
At full speed the rated noise is 36.8 dB(A), which is noticeable rather than silent, so buyers wanting quiet operation should plan on a lower fan curve. The sleeve bearing is a simple, budget-oriented design. Mounting uses standard 120mm 25mm spacing, and the 4-pin PWM plus 3-pin ARGB connectors require a PWM header and an ARGB header. Colour is black. The data does not list a price or release year.
Frequently asked questions
Is the AeroCool Cube A120 quiet at full speed?
The rated noise is 36.8 dB(A) at up to 1800 RPM, which is audible rather than silent. Running it closer to its 500 RPM minimum through a PWM fan curve should reduce noise, though the data does not list noise at lower speeds.
What is the AeroCool Cube A120 best used for?
With 70.95 CFM airflow and 2.06 mmH2O static pressure, it suits case intake and exhaust where open airflow matters. The modest static pressure makes it a weaker choice for dense radiators or restrictive heatsinks compared with high-pressure fans.
What connectors and size does the Cube A120 need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting, so your motherboard or controller needs both headers.















