| Model | Frost 9 FRGB |
|---|---|
| Size | 92 mm |
| Thickness | 25 mm |
| Speed range | 1200–1200 RPM |
| Max airflow | 23.5 CFM |
| Max pressure | 0.92 mmH₂O |
| Max noise | 25.9 dBA |
| Bearing | Sleeve Bearing |
| Connector | 3-pin + Molex |
| Lighting | RGB |
| Colour | Black |
Frost 9 FRGB is a 92 mm 25 mm black fan rated 1200 RPM 23.5 CFM and 0.92 mmH2O 25.9 dBA with RGB lighting
More AeroCool fans · All 92mm models · Browse the full fan database
About the AeroCool Frost 9 FRGB Fan
The AeroCool Frost 9 FRGB is a fixed-speed 92mm fan running at 1200 RPM, so there is no PWM control and no RPM range to tune. Its 23.5 CFM airflow and 0.92 mmH2O static pressure suit open case ventilation and light restriction rather than dense radiators or heatsinks, where higher pressure is usually wanted. At a rated 25.9 dB(A), expect a modest, steady noise level rather than near-silent operation, and the sleeve bearing is a simple, budget-oriented design.
Mounting follows the standard 92mm, 25mm-thick format, so it fits cases and coolers that accept that size. The 3-pin plus Molex connector means it can run from a motherboard header or directly from a power supply, though the Molex route gives no speed control. RGB lighting is listed, but the data does not state whether a controller or addressable header is required. Price and release year are not listed in the supplied data.
Frequently asked questions
Is the AeroCool Frost 9 FRGB quiet?
It is rated at 25.9 dB(A) at its fixed 1200 RPM, which is a modest noise level rather than silent. Because the fan has no PWM control, the speed and noise stay constant unless you use a separate voltage controller.
What is the AeroCool Frost 9 FRGB best for?
With 23.5 CFM airflow and 0.92 mmH2O static pressure, it suits 92mm case intake or exhaust and lightly restricted airflow paths. It is less suited to dense radiators or tight heatsinks that need higher static pressure.
Does the AeroCool Frost 9 FRGB fit a 92mm mount?
Yes, it is a 92mm fan that is 25mm thick, the common size for 92mm case and cooler mounts. Check your case or cooler clearance for a 25mm-thick fan before installing it.















