| Model | NOVA 12025 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 350–2400 RPM |
| Max airflow | 70.59 CFM |
| Max pressure | 3.72 mmH₂O |
| Max noise | 30.8 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Antec NOVA 120 is a 120 mm 25 mm fan rated 350-2400 RPM with 70.59 CFM and 3.72 mmH2O at 30.8 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec NOVA 120 120mm PWM Fan Mid Profile
The Antec NOVA 120 120mm PWM Fan Mid Profile pairs 70.59 CFM of airflow with 3.72 mmH2O of static pressure, so it suits both open case ventilation and resistance-heavy spots such as heatsinks or radiators. Its 350 to 2400 RPM range is controlled through a 4-pin PWM connector, letting the motherboard scale speed to load rather than running flat out. At maximum speed Antec rates noise at 30.8 dB(A), so expect audible airflow near 2400 RPM and quieter operation toward the low end.
The 120 mm diameter and 25 mm thickness match standard 120 mm mounting, and the fluid dynamic bearing is the only bearing type listed. There is no lighting, and the colour is black, so it is a plain functional fan rather than a show piece. The data does not list a price or release year. Buyers should weigh the high 3.72 mmH2O figure for pressure use and the 30.8 dB(A) ceiling for noise-sensitive builds.
Frequently asked questions
Is the Antec NOVA 120 quiet enough for a bedroom PC?
Antec rates it at 30.8 dB(A) at its maximum 2400 RPM. Because it is PWM controlled from 350 RPM, you can run it slower for less noise, but the data does not list noise figures for lower speeds.
Is the NOVA 120 better for airflow or static pressure?
It offers both 70.59 CFM airflow and 3.72 mmH2O static pressure. The high pressure figure makes it a reasonable choice for heatsinks and radiators, while the airflow suits general case ventilation.
Does the Antec NOVA 120 fit a standard 120mm mount and have RGB?
It measures 120 mm across and 25 mm thick, matching standard 120 mm fan mounts, and uses a 4-pin PWM connector. Lighting is listed as none, so there is no RGB.













