| Model | Tranquil 120 ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 400–2000 RPM |
| Max airflow | 64.02 CFM |
| Max pressure | 2.45 mmH₂O |
| Max noise | 26.9 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Tranquil 120 ARGB is a 120 mm 25 mm fan rated 400-2000 RPM with 64.02 CFM and 2.45 mmH2O at 26.9 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Tranquil 120 ARGB 120mm ARGB Fan
The Antec Tranquil 120 ARGB 120mm is a 120mm by 25mm case fan running from 400 to 2000 RPM through a 4-pin PWM connector. Its 64.02 CFM airflow and 2.45 mmH2O static pressure sit in a balanced range, so it suits open case ventilation and airflow-focused builds while still pushing through a radiator or dense mesh filter. Buyers should read the pressure figure as moderate rather than extreme, so very thick radiators may call for a dedicated high-pressure fan.
Antec rates noise at 26.9 dB(A), which is the figure to expect near the 2000 RPM ceiling; the 400 RPM floor lets the PWM header slow it for quieter idle running. The fluid dynamic bearing is listed as the bearing type. A 3-pin ARGB header is needed alongside the 4-pin PWM header, so check both motherboard connections. The frame is black and 25mm thick, fitting standard 120mm mounts. The data does not list a price or release year.
Frequently asked questions
Is the Antec Tranquil 120 ARGB 120mm quiet?
Antec rates it at 26.9 dB(A), which is the listed noise figure at its 2000 RPM maximum. The 400 RPM minimum and 4-pin PWM control let the fan run slower when your header lowers the duty cycle.
Is this fan best for a radiator or for case airflow?
It lists 64.02 CFM airflow and 2.45 mmH2O static pressure, a balanced combination. That suits general case airflow and light radiator or filter resistance, though the data does not specify a maximum radiator thickness.
What connectors and size does the Tranquil 120 ARGB need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It requires a 4-pin PWM header for power and control plus a separate 3-pin ARGB header for the ARGB lighting.













