| Model | PH-F120M25R_G2_DBK01 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 350–2000 RPM |
| Max airflow | 73.69 CFM |
| Max pressure | 1.99 mmH₂O |
| Max noise | 39.28 dBA |
| Bearing | Hydraulic Bearing |
| Connector | Linq6 (PWM + D-RGB) |
| Lighting | ARGB |
| Colour | Black |
Phanteks M25G2-120 Reversed is a 120 mm 25 mm fan rated 350-2000 RPM with 73.69 CFM and 1.99 mmH2O at 39.28 dBA
More Phanteks fans · All 120mm models · Browse the full fan database
About the Phanteks M25G2-120 Reversed 120mm Reverse D-RGB Fan
The M25G2-120 Reversed runs from 350 to 2000 RPM and moves 73.69 CFM at 1.99 mmH2O of static pressure. That balance of high airflow and modest pressure suits case intake and exhaust positions, including reversed-blade setups where the frame faces the visible side of the build. Buyers pushing air through dense radiators or filters should note the pressure figure is on the lower side, so it is not the obvious pick for thick, high-restriction cooling hardware.
Noise is rated at 39.28 dB(A) at the top end, so expect audible operation near 2000 RPM and quieter running toward the 350 RPM minimum. The hydraulic bearing is a long-life type, and the Linq6 connector carries both PWM control and D-RGB lighting, so the fan needs a controller or header that supports that combined connection rather than a standard 4-pin fan header alone. The frame is 120 mm square and 25 mm thick, and the colour is black. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks M25G2-120 Reversed quiet at full speed?
The manufacturer rates it at 39.28 dB(A) at its 2000 RPM maximum, so it will be audible at full speed. It can drop to 350 RPM, which should be noticeably quieter, though the data does not list a noise figure for lower speeds.
What is the M25G2-120 Reversed best used for?
With 73.69 CFM airflow and 1.99 mmH2O static pressure, it fits case intake and exhaust roles and reversed-blade builds where the frame faces outward. Its pressure is modest, so thick radiators or heavy filters are not its strongest use case.
What connector does the M25G2-120 Reversed need for PWM and RGB?
It uses a single Linq6 connector that carries both PWM control and D-RGB lighting. You need a controller or header supporting that combined connection, since a standard 4-pin fan header alone will not drive the ARGB lighting.














