No official product photo is published for this model. Specifications below are sourced from the manufacturer's own documentation.
| Model | AF12012GH2PB |
|---|---|
| Size | 120 mm |
| Thickness | 30 mm |
| Speed range | 600–2200 RPM |
| Max airflow | 80.47 CFM |
| Max pressure | 2.95 mmH₂O |
| Max noise | 36.99 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
Antec STORM T3 120 is a 120 mm 30 mm fan rated 600-2200 RPM with 80.47 CFM and 2.95 mmH2O at 36.99 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec STORM T3 120 120mm PWM Case Fan
The Antec STORM T3 120 is a 120mm fan that is 30mm thick rather than the usual 25mm, which gives it more room to move air. Its 80.47 CFM airflow suits open case ventilation, while the 2.95 mmH2O static pressure figure means it can also push through dense heatsinks or filters where lower-pressure fans struggle. Buyers should match the use case to those two numbers rather than assuming one fan covers everything.
Noise is rated at 36.99 dB(A) at the top of its 600–2200 RPM range, so expect the fan to be audible near full speed and quieter toward the 600 RPM floor. The 4-pin PWM connector allows speed control from a compatible header. The Fluid Dynamic Bearing is listed, and the fan is black with no lighting. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Antec STORM T3 120 a quiet fan?
Antec rates it at 36.99 dB(A) at its maximum 2200 RPM. Because it supports PWM from 600 to 2200 RPM, you can run it slower for less noise, but the data does not give a noise figure for lower speeds.
What is the Antec STORM T3 120 best for?
With 80.47 CFM airflow and 2.95 mmH2O static pressure, it suits both general case ventilation and higher-resistance spots such as heatsinks or filters. Its 30mm thickness means you should check clearance before mounting.
Does the Antec STORM T3 120 have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It connects via a 4-pin PWM connector, so it needs a compatible PWM header for speed control. Price is not listed in the data.














